Single use bag draining system - RoSS.DRAI

This standalone single use bag draining system rack enables controlled fluid flow while draining single-use bags on site. Connected peristaltic pumps enable the lowest holdup volume. 

Multiple racks can be attached, allowing simultaneous draining of several single-use bags per run.


Up to 60 Bags


Minimum Holdup Volume


Aseptically Closed System

Our customers trust in us:

Rentschler Biopharma SE



Features and Benefits of single use draining machine

Here we list some of the benefits and features of our single use draining machine:

  • Draining platform to minimize the residual holdup volume of single-use bags
  • Customized manifold system
  • Regulation of inclination for optimal position to drain bags
  • Compatible with any single-use bag up to 10L protected by RoSS
  • Multiple racks can be attached, allowing draining of up to 60 bags/run

Data sheet


Datasheet RoSS.DRAI

Filesize: 0.22 MB – Mime-Type: application/pdf

Case Study_RoSS.DRAI_Automated Draining ROI

Case Study - Automated Draining ROI

Filesize: 1.19 MB – Mime-Type: application/pdf

More solutions

RoSS.FILL Bag - single use bag filling and draining system machine

RoSS.FILL Bag | Single-use aseptic fill-filtration system for bags

RoSS.FILL Bag is a flexible automated single-use aseptic bag filling machine for dispensing biopharmaceuticals into single-use bags. The fluid path is designed to be fully disposable and is able to accommodate a variety of sterile connection and disconnection options.

RoSS.FILL Bottle_V1_Single Use Support

RoSS.FILL Bottle | Single-use aseptic fill-filtration system for bottles

The fully automated RoSS.FILL single-use bottle filling machine. The platform enables worry-free filling and filtration of your liquid drug into bottles, within less than 1 hour/batch. With its high filling accuracy, the platform provides continuous filling for up to 6 racks at the same time as closed system, no limitations in volume. 

Cell and gene therapy filling machine with RoSS.FILL CGT system

RoSS.FILL CGT | Fill-Filtration | 1mL-1000mL

1mL-1000mL: Fully automated cell and gene filling machine system for aseptic filling of multiple small single use bags. Special designed for use in cell & gene therapies with batch sizes at low volumes. With its high filling accuracy, the platform provides filling from 36 up to 128+ bags with one or several racks.


RoSS.LIQU | 3D Bag Tote

RoSS.LIQU is a smart rigid tote to protect 3D single-use bags with large volumes of up to 1000L for shipping applications. This robust stainless steel transport container is re-usable and offers a sustainable solution for single-use bag shipments compared to plastic alternatives.

More information

Single-use Technology

Super-fast, Agile and Modular Single Use Filling System for the Biopharma Industry

The fill and drain process for biopharmaceutical products can be a massive challenge for the biopharma industry. Here, single use systems offer a multitude of advantages.


Michael Eder

May 21, 2019

Cell & Gene Therapy

Increasing Patient Safety: Risk assessment for small volume fluid management

Autologous therapies and other ATMPs with small volumes exhibit certain specific requirements. The scope of handling advanced therapies require special handling and care. When handling of small volumes is already automated in an early stage, it is a way more straightforward path to commercialization of the drug product. The benefit of a closed systems with automated solutions add value by offering a higher degree of sterility, safety, and process flexibility.


Brian Moloney

December 4, 2023

Fill & Filtration

Aseptic bag filling – 5 critical considerations

Aseptic bag filling is a process that is very important to the biopharma industry. This article will give you the basics of aseptic bag filling, highlight the most critical factors of the technique and discuss key considerations pertaining to the commercial use of aseptic bags.


Brian Moloney

March 2, 2022

Send a Request